I changed my brake pads and realized at the end I may have swapped the inner and outer pads on the rear tires. I’m not 100% sure but I think the piston in one of the tires is pressing against the black pins like the top pad in the picture.

Should I correct this immediately or can I get by until my next change?

  • Pacattack57@lemmy.worldOPEnglish
    2·
    2 months ago

    Thank you I went ahead and swapped them. RockAuto threw me off by rubber banding the inner pads together so I thought that was the set. But hey you live and learn. Thankfully everything was pre loosened so it didn’t take me nearly as long to swap.

    • Montagge@lemmy.zipEnglish
      2·
      2 months ago

      Yeah always double check because there doesn’t seem to be any standard if things are packaged as sets of inner and outer or inners together and outers together.